Originally posted by Khazz65:

The thing is smoke is appearing where it should not appear at all. For instance, one building has smoke coming up from the base floor in a stone building 2 rooms away from the fire source. There is even a wall between it. This spot literally has zero chances to have smoke, yet it does even after I destroyed the fire source. I have only seen these issues on the 1st floor of buildings also.

If it is truly smoke, not fog, I'd submit a formal bug report.

On stone buildings I make a chimney with a cap on top.

I start with where I want my stone fireplace. Set it in place followed by pillars on the four corners. Destroy the fireplace and put pillars on the inside. Once again set your fireplace. It will slide perfectly between the pillars. place 1 X 2 stone on the longer sides and 1 x 1 in between until you get outside the roof or 1 stone floor section from the roof top. On top of the roof use 2 stone arches pointing toward 2 more. Place two stone sections on top.

The arches and stone sections on the roof also work if you have smelters indoors.

Originally posted by Khazz65:

The thing is smoke is appearing where it should not appear at all. For instance, one building has smoke coming up from the base floor in a stone building 2 rooms away from the fire source. There is even a wall between it. This spot literally has zero chances to have smoke, yet it does even after I destroyed the fire source. I have only seen these issues on the 1st floor of buildings also.

Are you sure that is smoke and not fog?

If you have good ventilation in the room with the fire source then you won't have smoke pouring everywhere. A high ceiling is good enough even if you don't have a chimney.

https://steamuserimages-a.akamaihd.net/ugc/1796348465083594291/E522BAC6ADB6359D37A7D5C44CFDB065656A3BFC/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false

High ceiling rooms + ventilation.

If you want you could invite me to investigate your building and purge any smoke demons.

The thing is smoke is appearing where it should not appear at all. For instance, one building has smoke coming up from the base floor in a stone building 2 rooms away from the fire source. There is even a wall between it. This spot literally has zero chances to have smoke, yet it does even after I destroyed the fire source. I have only seen these issues on the 1st floor of buildings also.