roof snap glitch/bug? (shingle)
1: vanilla, no mods.
so i found out shingle roof has less snapping options than tatch, when it comes to intesecting. Tried to make a 90 degree rotated intersecting roofs in the same 2x2 area, whit use of oter parts to support the snap. Tatch snaps as expected, shingle does not for the same spot. this is with 45 degree roof, not tested with 26.
https://steamcommunity.com/sharedfiles/filedetails/?id=2914010657&fileuploadsuccess=1
not pressing shift, caps lock is off.
the shingle also will not snap to any type of roof from the side, I built support roof to both sides there to try to snap,with no success.
(collision problem, or some weird stuff)
so i found out shingle roof has less snapping options than tatch, when it comes to intesecting. Tried to make a 90 degree rotated intersecting roofs in the same 2x2 area, whit use of oter parts to support the snap. Tatch snaps as expected, shingle does not for the same spot. this is with 45 degree roof, not tested with 26.
https://steamcommunity.com/sharedfiles/filedetails/?id=2914010657&fileuploadsuccess=1
not pressing shift, caps lock is off.
the shingle also will not snap to any type of roof from the side, I built support roof to both sides there to try to snap,with no success.
(collision problem, or some weird stuff)
6:13 am, January 7, 2023
DeathSpectrum replied to roof snap glitch/bug? (shingle) January 6, 2023 @ 9:59:49 pm PST
Try snapping 1M beams or the 45 or 26 beams to sides and front and snap to those if possible, i have made some great roofs with shingles, hope you can figure it out bud! take care
6:13 am, January 7, 2023
0 comments
0 likes